Safety Regulations for High-Altitude Rescue Ropes

The following safety regulations for the use of high-altitude rescue ropes are directly related to the reduction of rope strength and the safety of rescue personnel.

1. Do Not Step on the Rope
Stepping on the rope, leaving it exposed on decks or steel surfaces, or allowing it to rub against sharp edges can cause damage. For your own safety, you should always be aware of where you place your feet during high-altitude operations. Stepping on the rope or becoming entangled in a descending rope may result in being snagged by a live loop if the rope moves.

2. Do Not Stand Over the Rope
Standing over the rope or too close to a loaded rope is extremely dangerous. If the system fails, the rope may snap back rapidly, posing a serious risk of injury. Standing on an unloaded rope that suddenly bears weight may also cause unexpected accidents or injuries. To ensure safety, no one should stand on the rope, on a pile of rope, or on either side of a taut rope.

3. Protect the Rope from Sharp Edges
Bending over sharp edges can significantly reduce the strength of the rope. When the rope is under load, sharper corners increase abrasion and may even cut the rope. Use edge protection or appropriate equipment as needed to mitigate this risk.

4. Avoid Contact with Chemicals
Any chemicals that can damage nylon or polyester will adversely affect your rope. Rescue ropes should be stored away from light, heat, and chemicals.

The above are the safety regulations for high-altitude rescue ropes. For more information about ropes, please feel free to contact the manufacturer—Qingdao Huakai Ocean Technology Co., Ltd. (Hailiya Group).